Laser / plasma cutting solutions

Lifting and moving parts
after laser cutting.

Magnetic systems for lifting steel parts suitable for magnetic holding together after laser or plasma cutting, and moving them to the next process area.

Watch the application

The handling step after cutting.

See the handling step from the cutting area to the next process area.

Positioning on the cutting table

The system is positioned to suit the table holding the cut sheet parts.

Lifting suitable parts together

Parts suitable for magnetic holding are lifted together by their contact surfaces.

QSMAGNET magnetic lifting system handling a steel plate on a laser cutting table

Transfer to the next process area

The lifted parts are moved to the designated next process area.

System selection based on your cutting layout.

Part distribution and the usable contact area are decisive in assessing the lifting layout.

  • 01Material and thicknessSheet type and surface condition.
  • 02Cutting layoutPart sizes, holes and distribution.
  • 03Contact layoutModule placement and contact points.
  • 04Handling conditionsTotal load, crane and drop-off area.

Frequently asked questions

About magnetic handling after cutting.

This system is intended for lifting suitable cut parts together and transferring them to the next process area. Separating and sorting individual parts is a separate process.

It can also be assessed for steel parts coming off plasma cutting. Cut edge, surface condition, part temperature and contact area are reviewed together.

A cutting plan or photo, sheet type and thickness, smallest and largest part sizes, approximate total weight, and details of your crane and drop-off area will speed up the assessment.

Share your cutting layout.

Let’s start with a cutting photo or drawing, material details and approximate weight.