Robotic part handling

Robotic handling of sheet
and steel parts.

Gripper solutions for robotic picking, transfer and placement of sheet and steel parts suitable for magnetic holding. Let’s assess your part, your robot and your working method together.

Robotic part transfer

What operation do you need?

Let’s assess the gripper requirement for your handling task together.

Let’s assess your needs based on where the part is picked and where it is placed.

Let’s review the handling direction and motion pattern between production steps together.

Let’s define the gripper requirement based on part geometry and the placement plan.

Robot koluna entegre robotik manyetik tutucu

Choosing the right gripper for your needs.

Let’s assess mechanical, vacuum and magnetic gripping methods against your part and operating conditions.

  • 01Part and contact surfaceMaterial, geometry, thickness and weight.
  • 02Robot and motionRobot model, payload including the gripper, direction of motion and acceleration.
  • 03Process and integrationPick and place points, cycle requirements and control signals.

Frequently asked questions

About robotic part handling.

Part properties, robot model, total payload including the gripper, and motion conditions are reviewed together. Mounting and control connections are assessed for each application.

With thin and perforated sheets, the usable contact area, part flexing and thickness are decisive. Suitability is assessed from the part drawing and, where needed, a trial.

Robot model and flange details, part drawing and weight, pick-and-place points, target cycle time and the control signals to be used are required for the assessment.

Tell us about your part and your process.

Start with a photo or drawing of the part. Add your robot model, if you have one, and the operation you have in mind.