EPM Technology
Does a Lifting Magnet Drop the Load When the Power Fails?

In an EPM system, a properly established magnetic hold does not end because the power is cut. Power-failure behaviour and protection arrangements differ in conventional electromagnetic types; when you assess this need, you can look at the QSMAGNET EPM sheet lifting solution.
A maintained hold is not the same as a working crane
In EPM technology, power is used for the short operations that switch the magnetic state. Thanks to the permanent magnetic structure, a hold that has already been established does not depend on continuous current. This does not mean power is supplied to the crane’s motors or control system; whether handling can continue must be assessed separately.
Ask these two questions separately in the purchasing discussion: “What happens to the magnetic unit during a power failure?” and “How are crane movement and restarting managed?” Having the answers in writing for the specific model and installation prevents the features of different equipment from being confused.

Ask about the power-failure scenario in the quote
- Have it confirmed whether the unit is EPM or a continuously powered electromagnetic type.
- Ask how power, control and warning states are indicated, and where the procedure after a power failure is defined.
- Clarify operation, maintenance and technical support responsibilities for the crane and the magnetic system.
Keep material suitability in mind when discussing power-failure behaviour. A magnetic hold that is independent of electricity does not eliminate issues such as poor contact, an unsuitable load or exceeding capacity. The unit must be assessed under the load and conditions of use defined for it.
Bring an example of a power failure in your current plant to the discussion. Describe which machines stopped, where handling was interrupted and what the responsible team needed. Making your expectations concrete also clarifies the technical explanations to ask for in a new system. Include your maintenance manager in the discussion and compare the documents of your existing equipment with the explanations for the proposed system.
Frequently asked questions
Does EPM also use energy to release the load?
Yes. Release is carried out with a controlled electrical operation that switches the magnetic state.
Can people work under the load during a power failure?
No. The EPM holding feature does not make it acceptable to be under a suspended load.
Tell QSMAGNET about your existing crane and what happens during a power failure. Request a quote that clearly covers the operating conditions and integration scope of the EPM solution.
Related articles
All articlesEPM Technology
What Is an EPM Magnet? How Does It Work in Sheet Lifting?
Learn how an EPM magnet works, how it differs from a conventional electromagnetic system…
Read articleEPM Technology
Which Jobs Is a Battery-Powered Lifting Magnet Suitable For?
Which jobs suit a battery-powered lifting magnet? Assess power supply, charging plan and part…
Read articleHandling Methods
Clamp, Vacuum or Magnet? Which Is Right for Handling Steel Sheet?
Compare plate clamps, vacuum lifters and magnetic lifters for sheet handling by material, surface…
Read article


