Sheet Handling

How to Reduce Scratches and Surface Marks When Handling Sheet

3 min read

How to Reduce Scratches and Surface Marks When Handling Sheet

To reduce scratches and surface marks when handling sheet, first define the accepted surface quality and the contacts that occur during handling. Assess your gripper choice against acceptance criteria set on a real plate.

You can include the QSMAGNET magnetic lifting system in this assessment for your steel sheet application.

There is no single method for sensitive surfaces

Not all clamps have the same contact design. There are clamp models that use special synthetic pads for sensitive surfaces, so the generalisation that “clamps always scratch” does not make for a fair comparison.

On the vacuum side, there are also material options aimed at reducing marks left on the surface. The chosen pad material and the surface expectation must be assessed together; the same result should not be attributed to every product.

In a magnetic system, paint, protective film or an added intermediate layer can create a gap between the gripper and the sheet. Because this gap affects capacity, rubber or coatings should not be added at random to protect the surface.

Magnetic holding lets a plate be gripped from its surface. You can assess the location of the contact areas, your visible surface and your quality expectations together with this approach.

How to Reduce Scratches and Surface Marks When Handling Sheet – application image

How to make your surface expectations concrete

Explain the “no scratches” requirement with examples. Show which surface is visible, whether the part is moved before or after painting, and what kind of mark is unacceptable. If your customer has a quality specification, add it to the quote discussion.

  • Sample sheet: It should represent the material, coating and surface condition of daily production.
  • Inspection areas: Check the holding area, plate edges and the set-down surface separately.
  • Acceptance criteria: Define the permitted type of mark and the inspection method in advance.

Compare before-and-after photos of your current handling process. This makes it easier to describe which step needs improving. Use the same sample part and the same quality criteria when assessing a new system; don’t decide from catalog images alone.

Frequently asked questions

Does magnetic lifting guarantee zero surface marks?

Don’t assume an unconditional guarantee. Assess the surface expectation on the real application against acceptance criteria defined in advance.

Can a sheet be lifted through protective film?

Film affects the magnetic contact gap. Its suitability for the system and load must be confirmed by the manufacturer.

Send QSMAGNET a surface photo, coating details and an example of an unacceptable mark, and we will assess your application together.

Related articles

All articles